Re: Beep codes
"Wildman" <idonotread@comcast.net> schreef in bericht
news:hamdnS7JtN_LX4LcRVn-pQ@comcast.com...
> Can any one tell me where i can find beep codes for an Abit bx6
> motherboard??
>
>
Basic Beep Codes for ABIT AWARD BIOS Motherboards:
No beep at all - this means your motherboard is dead, either due to a
defective or underpowered power supply, poorly seated CPU or RAM, or a
dead-on-arrival board
One beep - board is working fine
One long beep then machine shuts down - faulty, improperly installed or
missing CPU
1 short(Beep) System booting is normally
2 short(Beep) CMOS setting error
1 long - 1 short(Beep) DRAM ERROR
1 long - 2 short(Beep) Display card or monitor connected error
1 long - 3 short(Beep) Keyboard Error
1 long - 9 short(Beep) ROM Error
Long(Beep) continuous DRAM isn't inserted correctly
Short(Beep) continuous POWER supply has a problem
A two-tone siren, generally caused by overheating or out of specification
voltages
Four beeps then machine shuts down. This is because this version of the BIOS
will shut down your machine if no fan tachometer signal is detected on the
fan header. Make sure you attach a fan to the FAN1 or FAN4 header or clear
CMOS to reset to default (no checking).
|