Home > Archive > Dell Computers > February 2005 > 8300 mobo in XPS Gen 3 Case
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
8300 mobo in XPS Gen 3 Case
|
|
|
| Problem; Dell 8300 motherboard in a new Dell XPS Gen 3 case.
The on/off button isn't the problem i think. But the powersuply i am not
sure about it. If i chekc fotos i see the same 2x12 pins connector, however
the colorsheme of the cables is different. Did anyone did try this or
succeeded this "transplant"
I thought XPS Gen 2 and 8300 shares the same motherboard. So the powersuply
should fit.
Is the powersuply from Gen 2 and 3 the same?
harrie
| |
|
|
"Johoo" <johoo123@xs4all.nl> wrote in message
news:4220a818$0$28993$e4fe514c@news.xs4all.nl...
> Problem; Dell 8300 motherboard in a new Dell XPS Gen 3 case.
>
> The on/off button isn't the problem i think. But the powersuply i am
> not sure about it. If i chekc fotos i see the same 2x12 pins
> connector, however the colorsheme of the cables is different. Did
> anyone did try this or succeeded this "transplant"
>
> I thought XPS Gen 2 and 8300 shares the same motherboard. So the
> powersuply should fit.
>
> Is the powersuply from Gen 2 and 3 the same?
>
> harrie
Go here and check this out. The Gen3 is 24 pin PCI Express.
The 8300 is 20 pin ATX with AGP. The Gen 2 is bizarre and totally
different from either one.
However, the 8300 should work ok with the Gen 3 power
supply, just make sure you line up the pin 1's and let
the 4 extras be unused. The first 10 pins on each side
are the same.
| |
|
| Sorry here's the link.
http://support.dell.com/support/sys...t=12&~subcat=84
"Pen" <nospam@nospam.com> wrote in message
news:T7ednWvTv6waML3fRVn-tg@adelphia.com...
>
> "Johoo" <johoo123@xs4all.nl> wrote in message
> news:4220a818$0$28993$e4fe514c@news.xs4all.nl...
>
> Go here and check this out. The Gen3 is 24 pin PCI Express.
> The 8300 is 20 pin ATX with AGP. The Gen 2 is bizarre and totally
> different from either one.
>
> However, the 8300 should work ok with the Gen 3 power
> supply, just make sure you line up the pin 1's and let
> the 4 extras be unused. The first 10 pins on each side
> are the same.
|
|
|
|
|